miles01110
May 5, 01:25 PM
External drives are going to be the most cost-effective way to do it.
mif
Apr 12, 01:15 AM
or vice versa
dubbz
Dec 19, 02:00 PM
Cool :)
trip1ex
May 1, 10:22 AM
Why don't you wait unit the new imac comes out and then decide?
more...
Isoparm
Mar 3, 07:50 PM
I'm trying to forward requests from one port to another and running into problems.
I have a Mac Server (10.5) and a number of Mac clients. I want requests going to one of my clients for port 80 (192.168.1.20:80), to go instead to port 10080 (192.168.1.20:10080).
I've tried everything I can but I can't seem to get this to work. Here's what I've done:
I've added this to my ipfw.conf file:
add 100 fwd 192.168.1.20,80 ip from any to 192.168.1.20 dst-port 10080
But that didn't seem to work.
I also tried to add the correct info the my natd.conf.apple file.
natd.conf.apple:
interface en0
natportmap_interface en1
dynamic yes
log yes
log_denied no
deny_incoming no
use_sockets yes
same_ports yes
unregistered_only yes
reverse no
proxy_only no
clamp_mss yes
redirect_port tcp 192.168.1.20:80 192.168.1.20:10080
I stop and restart both NAT and Firewall from the Server Admin.
Only other thing I can figure is that I've got two NIC's in the server (en1 & en0) en1 is where all the clients are and the 192.168.1.xxx IP addresses. But en0 is the direct connection to the internet. So is it possible that my port forwarding is working, but on the wrong interface?
Is there something I'm doing wrong here?
Any help would be greatly appreciated. Thanks in advance.
I have a Mac Server (10.5) and a number of Mac clients. I want requests going to one of my clients for port 80 (192.168.1.20:80), to go instead to port 10080 (192.168.1.20:10080).
I've tried everything I can but I can't seem to get this to work. Here's what I've done:
I've added this to my ipfw.conf file:
add 100 fwd 192.168.1.20,80 ip from any to 192.168.1.20 dst-port 10080
But that didn't seem to work.
I also tried to add the correct info the my natd.conf.apple file.
natd.conf.apple:
interface en0
natportmap_interface en1
dynamic yes
log yes
log_denied no
deny_incoming no
use_sockets yes
same_ports yes
unregistered_only yes
reverse no
proxy_only no
clamp_mss yes
redirect_port tcp 192.168.1.20:80 192.168.1.20:10080
I stop and restart both NAT and Firewall from the Server Admin.
Only other thing I can figure is that I've got two NIC's in the server (en1 & en0) en1 is where all the clients are and the 192.168.1.xxx IP addresses. But en0 is the direct connection to the internet. So is it possible that my port forwarding is working, but on the wrong interface?
Is there something I'm doing wrong here?
Any help would be greatly appreciated. Thanks in advance.
jimthorn
Jul 5, 01:19 PM
Originally posted by Nermal
I installed from the 10.2.1 CDs and updated to 10.2.6. Take a look at your files and see if they're the same size and version.
Thanks for all the info, Nermal. I'll check my files.
Originally posted by iJon
well now that i look i have the same problem. but finder is working ok so i dont really care.
Yeah, that's my basic feeling too. It seems to work fine. Actually, because it works, I'm really not sure how long ago this started. I just glanced at the Dock the other day and was surprised not to see the little black arrow under the Mac face. Now I'm problem-solving it just for an excuse to learn more about the workings of OS X.
I installed from the 10.2.1 CDs and updated to 10.2.6. Take a look at your files and see if they're the same size and version.
Thanks for all the info, Nermal. I'll check my files.
Originally posted by iJon
well now that i look i have the same problem. but finder is working ok so i dont really care.
Yeah, that's my basic feeling too. It seems to work fine. Actually, because it works, I'm really not sure how long ago this started. I just glanced at the Dock the other day and was surprised not to see the little black arrow under the Mac face. Now I'm problem-solving it just for an excuse to learn more about the workings of OS X.
more...
noekozz
Apr 29, 10:23 AM
Take your pirating elsewhere.
clearly he stated he installed a trial version of My3G
reading + you = fail
OP that's part of the trial, once you purchase My3G the ads are gone.
clearly he stated he installed a trial version of My3G
reading + you = fail
OP that's part of the trial, once you purchase My3G the ads are gone.
HiRez
Oct 29, 05:47 AM
Pretty sure they cannot play MP3 CDs. I don't even think the MP3 CD format existed when the PS2 came out (MP3 files existed, but no one had yet thought of making a CD player capable of playing them directly).
more...
nitynate
Oct 17, 12:33 PM
No, I love it!
It's just boring.
Thats all.
It's just boring.
Thats all.
themadchemist
Jun 16, 12:37 AM
I suggest you make some wild and unsubstantiated claims about Macs and PC's or something similar to get it started with a nice big flame-war.
How about one of these:
2.5ghz G5 is just an overclocked 2.0. Otherwise why would it need to be watercooled?
It's about time Apple made a Phone/PDA
Apple ought just get real and start using Intel/AMD and get their new cases redesigned by Alienware. OH and get some decent games...
That sort of thing ought to do nicely. ;)
I would kinda like to find a website where flame wars were cherished, trolls were honored, and bitter insults were extolled.
Of course, I appreciate and enjoy the close community that has formed here too much to want MacRumors to be that site, but I would like my occassional craving for flaming to be satisfied somewhere.
How about one of these:
2.5ghz G5 is just an overclocked 2.0. Otherwise why would it need to be watercooled?
It's about time Apple made a Phone/PDA
Apple ought just get real and start using Intel/AMD and get their new cases redesigned by Alienware. OH and get some decent games...
That sort of thing ought to do nicely. ;)
I would kinda like to find a website where flame wars were cherished, trolls were honored, and bitter insults were extolled.
Of course, I appreciate and enjoy the close community that has formed here too much to want MacRumors to be that site, but I would like my occassional craving for flaming to be satisfied somewhere.
more...
seubjoh
Mar 23, 12:51 PM
I think im just going to borrow a snow leopard disk from a friend and install it that way. Just curious though, when I had my own copy in my disk drive my windows pc wouldnt recognize it, how am I supposed to install boot camp off it?
sebisworld
Jan 7, 10:50 AM
I have already tried moving files in and out of FileVault and creating empty disk images and deleting them but nothing has brought the optimization dialog back when I log out.
I do have a backup of my data (it's about two weeks old). It's on an external harddrive in Iceland (I'm on vacation in Germany now) and just a mirror of the disk before I turned FileVault on. I do not want to lose all the changes I made during the last two weeks, though - and I also can't clear the external harddrive for a new backup, since I had to delete many huge files on the Powerbook in order to turn FileVault on in the first place.
I also had to move my entire iTunes folder to my iPod - leaving me all without music (I deleted it on my Mac and cleaned my iPod before I manually copied the Music folder). I copied a few songs back from my iPod to my PB, though.
I hate FileVault.
I do have a backup of my data (it's about two weeks old). It's on an external harddrive in Iceland (I'm on vacation in Germany now) and just a mirror of the disk before I turned FileVault on. I do not want to lose all the changes I made during the last two weeks, though - and I also can't clear the external harddrive for a new backup, since I had to delete many huge files on the Powerbook in order to turn FileVault on in the first place.
I also had to move my entire iTunes folder to my iPod - leaving me all without music (I deleted it on my Mac and cleaned my iPod before I manually copied the Music folder). I copied a few songs back from my iPod to my PB, though.
I hate FileVault.
more...
AlaskaMoose
Mar 5, 12:48 AM
I am too new at CS5 to be of much help, but I wonder if this would be of any help to you (?):
a. Take a good quality RAW photo of the picture, and open this RAW image in Camera Raw as a Smart Object. See if you can adjust the area that is too light (left of the photo).
b. Now, double-click on the image shown in the Layers panel, which in turn will open a layer of the image in Camera Raw. Now adjust the dark side of the image, and then click on "Done." The result is two layers blended into one.
-------------
a. Take a good quality RAW photo of the picture, and open this RAW image in Camera Raw as a Smart Object. See if you can adjust the area that is too light (left of the photo).
b. Now, double-click on the image shown in the Layers panel, which in turn will open a layer of the image in Camera Raw. Now adjust the dark side of the image, and then click on "Done." The result is two layers blended into one.
-------------
eyelikeart
Oct 20, 04:43 PM
Originally posted by job
Anyone remember Travis?
I wonder if he ever got his free computer? :rolleyes:
Anyone remember Travis?
I wonder if he ever got his free computer? :rolleyes:
more...
RawBert
Aug 3, 10:25 AM
It's Y2K all over again. :)
I hope the extent of damage is minimal. Just think if a few key satellites are damaged. Some won't have a cell phone for a while. Maybe go without TV. ...The horror.
As far as more serious concerns, I'm sure the military has contingency defenses in case the system comes crashing down. :eek:
It's gonna be interesting to see.
I hope the extent of damage is minimal. Just think if a few key satellites are damaged. Some won't have a cell phone for a while. Maybe go without TV. ...The horror.
As far as more serious concerns, I'm sure the military has contingency defenses in case the system comes crashing down. :eek:
It's gonna be interesting to see.
glocke12
Mar 21, 05:50 AM
I did not know these existed, and actually do not think they are a bad idea if you are the type to take your gear outside in inclement weather.
more...
alansmallen
Oct 26, 03:24 PM
Security guarding the store.:apple:
http://farm3.static.flickr.com/2360/1764383398_44fa8e86b4_o.jpg
http://farm3.static.flickr.com/2360/1764383398_44fa8e86b4_o.jpg
NttDocomo
Feb 25, 12:45 AM
Hi with all the wonderful help in this forum I have just jailbroken my iPhone 4. Now I am trying to do the same for my iPad. Since iPad doesn't have baseband, should I just restore to 4.2.1 directly from iTunes or I should still download the firmware somewhere and start TSS server of TinyUmbrella while restoring to 4.2.1? Thank you very much for all the help. :)
Hermes Monster
Jan 26, 03:03 AM
Not sure the sarcastic comments and put downs were required, I thought I made it quite clear I didn't know what I was doing, hence asking for advice. To reiterate my question and perhaps make it more clear - I was hoping someone might know of a online resource or book which would give guidance on what type of font works well in certain circumstances. Such a thing might not exist as it's such a broad area and very specific to each illustration or logo, but in the interests of self improvement I thought I would ask.
I'll try and upload some examples when I'm at my computer
I'll try and upload some examples when I'm at my computer
awmazz
May 16, 08:30 PM
9to5Mac picked up the story. That's awesome! http://9to5mac.com/node/16891
Ha, one of the comments is saying it was made for the Batman TV show. Which was back in the '60s!
Ha, one of the comments is saying it was made for the Batman TV show. Which was back in the '60s!
ihav0frnds
May 2, 06:14 PM
haha pretty good
Rapmastac1
Sep 16, 01:29 AM
I'm very detailed when it comes to taking care of my iTunes library. I have almost 6,000 songs and I average about 80 new songs a month (mostly cd compilations). I rarely every buy actual physical cds unless it's for an album I really love, so it gets the shelf treatment.
I use all the fields rather normally. I prefer to only have a few basic Genres which I then break down under the "Grouping" tag. I use various tags for various reasons. I use the grouping for the sub-genre, and naming the record label. The lyrics tab is used as a way to put track-lists in songs that are one continuous track. The comments section is used for tracks that are complete (aka they have all the track information and album art embedded into the file itself). And once every year I have a program that runs through and finds the BPM of each track.
Now don't even get me started on playlists and playlist folders.
I use all the fields rather normally. I prefer to only have a few basic Genres which I then break down under the "Grouping" tag. I use various tags for various reasons. I use the grouping for the sub-genre, and naming the record label. The lyrics tab is used as a way to put track-lists in songs that are one continuous track. The comments section is used for tracks that are complete (aka they have all the track information and album art embedded into the file itself). And once every year I have a program that runs through and finds the BPM of each track.
Now don't even get me started on playlists and playlist folders.
itickings
Apr 10, 05:31 AM
...or you could support DNS, and connect to for example [servername].dyndns.org (http://dyndns.com) instead of an IP address.
You can then edit the /etc/hosts file (or equivalent) on your LAN computer(s) to point to 192.168.1.2 instead of resolving the public IP through name servers.
You can then edit the /etc/hosts file (or equivalent) on your LAN computer(s) to point to 192.168.1.2 instead of resolving the public IP through name servers.
jeremy.king
Jan 10, 11:12 AM
does firefox have a key command for cycling through tabs?
Yes, amongst many others.
http://www.mozilla.org/support/firefox/keyboard
Yes, amongst many others.
http://www.mozilla.org/support/firefox/keyboard
No comments:
Post a Comment